How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have to follow a series of specific steps to add a second ignition key. This requires a handheld computer, called Tech-2 which is to be used by the dealer. A new key and transponder have to be purchased and then programmed into the car.
Change your keys regularly to prevent one from deteriorating faster than another. This will keep your keys in good condition.
Replacement Case
The new key fobs are not like the old Saab keys. They feature electronic components that make them difficult to copy. This has made theft of cars considerably more difficult than it was years ago. However, it has made replacing lost keys a comparatively expensive task.
Every owner of a 9-3 Saab should have at a minimum two functioning keys. It's expensive to replace a lost or damaged key since it requires replacing the CIM module, and reprogramming the locking cylinders. Dealers usually charge between $100 and $200 for this.
There are ways to reduce the high price. Some parts providers will look up the code from an extra key (usually the same one that opens the doors and turns the ignition) and cut a new key blade out of metal for just a fraction of dealer cost. The key must, however, be identical to the original one in order to function within your car.
Follow these steps to replace the case. Related Site will need a flathead screwdriver as well as some patience. With the screwdriver, you can pry off the plastic and then remove the emergency key. Once the case is open, remove the electronic components and place them inside the new case. Make sure you put the correct key and badge back in the case too.
Replacement Battery
The Saab 9-3 replacement battery is a cheap component that can be quickly and easily replaced. This YouTube tutorial for DIY Cyclone Cyd will show you how to replace the battery in the remote key fob in only four steps. This tutorial can be used with any modern Saab key fob. However, the procedure may differ slightly.
The first step is to locate the button that releases the backup key inside the fob. This is usually located just below the Saab logo on the back of the fob. Then take a flathead screwdriver into the tiny hole in this button. This will be enough to allow you to open the fob's case so that you can replace the battery.
Once the new CR1632 battery is in place then you can reassemble your remote key fob. You can then program it to your car. The procedure should take no more than an hour at most. It is a simple procedure that doesn't require any special tools.
The process can be a bit more complicated in the event that you lose the key, but it's possible. The dealer has to first verify the VIN of the vehicle and then order the replacement TWICE module as well as key blade that is matched to the unique code. The dealer will then need to program the key using MDI an innovative software tool.
Replacement Key Fob
The key fob contains batteries that are used to lock and unlock your vehicle. The batteries last for a period of and will eventually die. This is a problem that occurs with all vehicles and the good thing is that you can change the batteries in many key fobs and not have to replace the whole case. You can buy fobs replacements on Amazon that come with all the electronics already in place, so you'll just pop open the case and replace those batteries that are old. It is important to remember that you'll need remove the emergency key first, and you can do this by inserting the screwdriver of a small flathead into the slot located in the middle of the case. The screwdriver should be moved around the case, and it should split open, making it much easier to remove.
If you're ready to replace your keys, be sure to have an extra set on hand. This will save you a significant amount of money. If you have an additional key, request the dealer to cut it and program it to your vehicle. This is a lot less expensive than purchasing a brand new key fob.
It is possible to add a second key to your car If you don't already have one, but it requires lots of research and effort. The cost for adding a second key is a few hundred dollars, and it also requires programming of the car's computer. Professionals can accomplish this, but it's an expensive option.
Replacement Ignition
The latest SAAB 9-3 uses an advanced alarm system built on a keycode. If you lose your primary key, it could be expensive to add another one, as the car has to be equipped with a specific computer and also be programmed to accept a brand new key. Dealers can charge hundreds of dollars to program a new key if they are unable to do it.
If you've lost the only working key the dealer will replace your car's computer (known as the CIM or SAAB TWICE) to create a replacement, and they will charge a premium for it. We can reprogram the existing EEPROM on your car's computer to be ready to accept an additional key. This will save you more than 50% on the price you'd spend at an auto dealer.
If you've owned a SAAB 9-3 many years you're aware that the ignition keys aren't very durable. They can become extremely sticky, and the buttons are known to fall off every now and then It is recommended that you consider replacing your ignition key if it isn't working properly. It's not as difficult as it appears to replace the ignition key. With the right tools, it is able to be accomplished in a short time.